ML50C2-PV 2 x 25W two channel output 0-10V & Push dimmable LED driver 250mA - 700mA 123x79x23.5mm
Description
1, Press-in terminals in primary and secondary side, easy to assemble.
2, Two independent output current channel, each channel supplies selectable current from 250mA to 700mA.
3, with push and 0-10V dimming function, dimming range from 0%-100%.
4, The output current of each channel is selectable by dip swtiches.
5, Jumper design for switching different dimming modes, it is very convenient to select suitable dimming function as you required.
6 Memory function: The driver has built-in permanent memory against power failure. Lights can return to previous dimming level when switch off and on again, even at mains restores.
7, Synchronization: thanks to the MCU programme, up to 50pcs drivers should be controlled by the same switch. This means there is no need for any additional synchrony wire in larger installations, where many drivers should be controlled by one switch.
8, Maximum length of the cable, from switch to last driver is 20m.
9, Factory setting: 100% dimming level and 250mA output.
10, Reset the LED diver easily by a jumper.
11, Protection: Short circuit / Over voltage / Over temperature.
12, Long life span 50,000h, 5 years guaranty.
Mechanical Specification
Specifications
| INPUT | Input voltage | 220-240Vac |
| Input frequency | 50-60Hz |
| Input current | 0.26A max |
| Power factor | ≥0.90 |
| Efficiency(Note1) | ≥85% |
| Leakage current | ＜0.5mA/240Vac |
| OUTPUT | Output current/voltage and load | 250mA 16-60V DC 2x15W max 350mA 16-60V DC 2x21W max 400mA 16-60V DC 2x24W max 450mA 16-60V DC 2x25W max 500mA 16-50V DC 2x25W max 550mA 16-46V DC 2x25W max 600mA 16-42V DC 2x25W max 700mA 16-36V DC 2x25W max |
| Output load range | 2x25W max |
| Current accuracy | ±5% |
| Dimming mode | 0-10V, PUSH |
| ENVIRONMENT | Working temp.(Ta) | -20~50℃ |
| Surface temp.(Tc) | 85℃max |
| Working humidity | 20~90%RH non-condensing |
| Storage temp. | -40~80℃ |
| Life time | ≥50,000hours |
| PROTECTION | Isolation class | Class I, SELV |
| Protection class | IP20 |
| Short circuit | Protection type; auto rest |
| Over voltage | Protection type; auto rest |
| Over temperature | Protection type; auto rest |
| SAFETY&EMC | Safety | EN61347-1, EN61347-2-13, EN60598-1, EN60598-2-6 |
| EMC | EN55015, EN61000-3-2ClassC |
| EN61000-3-3, EN61547 |
| Approvals | SEMKO, CE |
| Withstand voltage | IN-OUT:3.75KVAC/5mA/1min; IN-FG:1500VAC/5mA/1min |
| OUT-FG:500VAC/5mA/1min |
| NOTE | 1, Efficiency is measured at 550mA/46Vdc output set by DIP switch 2, All parameters not specially mentioned are measured at 230Vac input, rated load and 25℃of ambient temp. |
Applications
For LED down light, LED panel light, etc…
Wire diagram
Product Tags:
|
|
High Power 2 x 25W Two Channel Output 700ma Dimmable LED Driver 0-10v Images
|
